by Injection Moulding | Feb 21, 2025 | Uncategorized
Basic principle of mould opening stroke is based on Core/Punch length Component length with runner clearance for removing the component e.g. if total of above 3 is 20mm then opening stroke would be set at about 2 times i.e. 2 *20mm = 40mm...
by Injection Moulding | Jan 29, 2025 | Basic Principles
Plunger Type: This system is primarily used for products which are produced in small quantities and can be produced manually. Also these products could be a combination of materials e.g. Screw Driver which is made of two materials i.e. metal and plastic Screw Plunger...
by Injection Moulding | Jan 18, 2025 | Basic Principles
An American Inventor along with his brother designed and created the concept of Injection Moulding in about late 1800s. The fundamentals of such a concept was that some raw material was to be converted into a finished product using the principle of Injecting the...
